Feature

●Cutting capacity (soft wire; φ): 0.0008 - 0.06 inches (0.2 - 1.6 mm); Cutting capacity (medium hard wire; φ mm): 0.05 inches (1.2 mm); Length of the mouth: 0.3 inches (9.0 mm); Joint width: 0.5 inches (13.5 mm); Total length: 0 oz (57 g)
●High-precision nipper that is ideal for cutting work related to precision electronics. The blade is straight and the cutting surface is flat. The tip is precision finished, so even dense wires can be cut if they have a diameter of 0.008 inches (0.2 mm). The joint part is joined by stainless steel rivets. Even with small forces, it can move smoothly. Comes with an open spring that is convenient for repetitive work, and a stopper to prevent the tip from opening more than a constant interval
●The hardness of the blade is approximately HRC64. Comes with a wire clamp that holds the cut pieces so that it will not accidentally fall into the substrate


Description


High-precision nipper that is ideal for cutting work related to precision electronics.
The blade is straight and the cutting surface is flat
The tip is precision finished, so even dense wires can be cut if they have a diameter of 0.008 inches (0.2 mm).
The joint part is joined by stainless steel rivets.
Even with small forces, it can move smoothly.
Comes with an open spring that is convenient for repetitive work, and a stopper to prevent the tip from opening more than a constant interval.
The hardness of the blade is approximately HRC64.
Comes with a wire clamp that holds the cut pieces so that it will not accidentally fall into the substrate.
Head finish: Polished
Handle specification: Comfort
The cutting surface is flat.
Cutting capacity (soft wire; φ): 0.0008 - 0.06 in (0.2 - 1.6 mm)
Cutting Capacity (medium hard wire; φ mm): 0.05 inch (1.2 mm)
Length: 4.9 inches (125 mm)
Mouth length: 0.4 inches (9 mm)
Joint Width: 0.5 inches (13.5 mm)
Joint Thickness: 0.3 inches (7.5 mm)
Weight: 1.8 oz (50 g)
The comfort handle (this product) is not insulated.



From the Manufacturer



78711257871125

Product description


High-precision nipper that is ideal for cutting work related to precision electronics.
The blade is straight and the cutting surface is flat
The tip is precision finished, so even dense wires can be cut if they have a diameter of 0.008 inches (0.2 mm).
The joint part is joined by stainless steel rivets.
Even with small forces, it can move smoothly.
Comes with an open spring that is convenient for repetitive work, and a stopper to prevent the tip from opening more than a constant interval.
The hardness of the blade is approximately HRC64.
Comes with a wire clamp that holds the cut pieces so that it will not accidentally fall into the substrate.
Head finish: Polished
Handle specification: Comfort
The cutting surface is flat.
Cutting capacity (soft wire; φ): 0.0008 - 0.06 in (0.2 - 1.6 mm)
Cutting Capacity (medium hard wire; φ mm): 0.05 inch (1.2 mm)
Length: 4.9 inches (125 mm)
Mouth length: 0.4 inches (9 mm)
Joint Width: 0.5 inches (13.5 mm)
Joint Thickness: 0.3 inches (7.5 mm)
Weight: 1.8 oz (50 g)
The comfort handle (this product) is not insulated.

Product information