Feature

●The power module uses a double center dust magnet that is wound in 1.2mm copper wire
●Large power LED, large power and current input and 100V/210A low resistance MOS, suitable for motors
●Support MOS and reverse input protection, no worries about wrong input
●When using a storage battery as input, the low voltage protection protects the module and battery against damage from overdischarge
●Good fan heat sink to cool heat dissipation and intelligent temperature control thicker


Description

Specifications:
Type: Non-insulated Boost Module (BOOST)
Input Voltage: DC 10V to 60V
Max. Input Current: 30 A (30 V input voltage 10 V)
25A (input voltage of 60 V is 31 V).
Current consumption: 15 mAh (12 V when converted to 20 V)
Output Voltage: 12V max to 90V (Adjustable, default is 19V) Output current: 20A (When it comes to the difference between input and output voltage, the larger voltage difference is smaller, the output current is existing, if a current is over 15A, please enhance the heat dissipation. )
Constant Current Range: 0.8A per 20A (+/- 0.3A)
Reverse Input Protection: Yes (150A MOS)
Low Voltage Protection: Yes (50V adjustable, V8 to self-recovery)
Operating Temperature: -40℃~+85℃(If the temperature is too hot, please increase the heat dissipation)
Frequency: 150kHz
Conversion efficiency: 92% to 97% (Efficiency is related to the input/output voltage, the difference between current and voltage is more efficient)
Over current protection input: Yes (automatically protect the input more than 35A, and the power supply voltage will not increase)
Short circuit protection: Yes (input 30A fuse)
Wiring Method: Terminal (Use large current copper wire)
Max. Output Power = Input Voltage * Max Current (If Input 12V, Maximum Output Power = 12V * 30A = 360W)
Size: 5.11 x 3.3 x 2.04 inches (130 x 84 x 52 mm).