Feature

●MPPT solar charging controller with advanced MPPT technology and super fast tracking speed, tracking efficiency is over 99.5%. High quality low failure rate components in ST and Infinion to ensure product life
●Adaptive 3-stage charging mode based on digital control circuit, Tracer AN series controller can effectively extend battery life and greatly improve system performance. Auto-controlled relay of load, utility, or generator makes it easy to configure your hybrid power system
●Automatic identification of 48v/36v/24v/12v system voltages. Automatic control system that limits charging power and current exceeds rated values. Wide range of maximum power point operating voltage, improved solar power module utilization, double automatic limit of rated charging and charging current. Support 4 charging options: sealed, gel, submersion, user
●Standard Modbus communication protocol with RS485 interface to monitor or set parameters using phone apps, MT50 meters, and PC software
●Dual RS485 ports (RJ45 connector), supports up to 8 charging parallel to expand the system and meet various monitoring requirements for a wide range of applications. Solar RVs, home systems, field monitoring, etc

[Tracer8415AN+MT50+RTS+RS485]





Description

Function:

High quality low failure rate components in ST and Infinion to ensure product life 
Automatic control system that limits charging power and current exceeds rated values. 
Battery temperature compensation function.
Real-time energy recording and statistical functions 
Automatic overheating power reduction function 
100% of the full load operation within the working environment temperature range within charging and discharging 
Supports up to 8 units parallel to expand the system 
Load relay control external load switch signal to achieve a variety of load work modes.

Specifications:
Rated charging current: 50A
Nominal system voltage: 12/24/36/48VDC or automatic
Battery Input Voltage Range: 8V - 68V
Battery Type: Sealed (Default/Gel/Submersion/User)
Rated Charging Power: 625W/12V, 1250W/24V, 1875W/36V, 2500W/48V
Maximum PV Open Circuit Voltage: 150 V (at lowest operating environment) 138 V (at 25 °C) ambient temperature)
Temperature compensation coefficient: -3mV/℃/2V (default)
Ground: General Negative Ground

Accessory Description
1 Remote Temperature Sensor (Model: RTS300R47K3.81A)
Getting battery temperature to compensate for temperature control parameters, the standard length of the cable is 9.8 ft (3 m).
2. Remote Meter (Model: MT50)
Wide LED screen displays real-time operational data and work status in digital, graphic, and text formats. Automatically identifies solar controller type, model and related parameter data.
3 USB-RS-485 Converter (Model: CC-USB-RS485-150U)
USB to RS-485 converter is used to monitor each controller on the network and update firmware using Solar Station PC software. Cable length is 1.5m.
Package List:
1 x Tracer5415AN Solar Charging Controller
1 x MT-50 Remote Meter
1 x RTS
1 x RS485
1 x User Manual