Feature
●Made in Japan.
●This is a small, high performance dipole antenna developed using the latest antenna design technology.
●Small and thin yet capable of bringing performance close to the ideal value of your dipole antenna.
●It can be placed in tight spaces for high performance.
●The back of the antenna is attached to the back of the antenna for use inside the resin case.
●Use with TWELITE coaxial connector type.
●Radio law prohibits use of antennas and connecting cables other than that have been certified in technical compliance.
Description
アンテナ形式:半波長ダイポール
アンテナサイズ:42.5 mm x 8.75 mm x 1.0 t
重量:約1.4g
コネクタ:UFLタイプ
利得: 2.00 dBi
ケーブル長:100 mm
電波の伝搬の特性上、無線モジュールの通信性能は設置する位置や向きに著しく影響を受けます。
アンテナ間に障害物がある場合は期待する通信が出来ないことがあります。
また、アンテナ間に障害物がない場合でも、高さが不十分な時や、電波ノイズが多い場所では期待する通信が出来ません。
アンテナの高さや向きを変えると通信品質が改善される場合があります。
原則としてアンテナは垂直に設置してください。アンテナ上に表示された矢印（アンテナ方向マーク）が天地方向を指すように設置してください。
From the Manufacturer
Low Profile Antenna
MW-A-P4208-10
It can be placed in tight spaces for high performance.
Small and high performance dipole antenna.Small and thin yet performs close to the absolute gain (2.14 dBi) of the dipole antenna.
Antenna Type: Half-wavelength dipole
Antenna Size: 42.5mm x 8.75mm x 1.0 t
Weight: Approx. 0.05 oz (1.4
Connector: UFL type
Gain: 2.00 dBi
Cable Length: 3.9 inches (100 mm)
Due to the characteristics of radio wave transportation, the performance of the antenna will be greatly affected by the position and orientation of the antenna being installed.
If there are obstacles between antennas, you may not be able to expect communication.
In addition, even if there are no obstacles between the antennas, it cannot be expected to communicate when the height is insufficient, or in places with high radio noise.
Change the height or orientation of the antenna may improve the communication quality.
As a general rule, the arrow (antenna direction mark) displayed on the antenna should point to the terrestrial direction.
Installation Examples
MW-A-P4208-10
Attach the double-sided tape to the inside of the plastic case.(The back of the antenna is attached with double-sided tape. )
Used for connecting to coaxial connectors of communication modules.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MW-A-P4208-10 | MW-A-P2010-05 | MW-A-P2525 | MW-A-D85 | MW-A-D114 | MW-A-BP01 | |
| Type | Flat Antenna | Flat Antenna | Flat Antenna | Indoor Antenna | Waterproof Antenna | Double-polarized antenna |
| Directional | ✓ | |||||
| Waterproof | ✓ |
|
|
|---|---|
| MW-A-D173 | |
| Type | Indoor Antenna |
| Features | Comes with a base for convenient tabletop installation. |