Feature
●Brand : ATPWONZ
●Material : Rubber
●(Perfect Set) This 32-piece set includes a tire valve core for protection, repair, and inspecting your tires
●Tire valve core: There are 32 pieces. Made of copper, it is more heat resistant and durable than regular black rubber gaskets
●(Insect Screwdriver) For installing and removing insects from the wheels. Total Length Driver Type: 3.7 inches (95 mm), Small: 1.4 inches (35 mm), 4 or 2 wheels
●[Uses] Used to screw the valve core in the valve of cars, bicycles, and electric vehicles
●Product Contents: This product is a set of 1 insect screwdriver x 1, air valve wrench x 1, valve core x 30
Description
How to Replace Valve Core?
DIY step 1: Without removing valve cap.
First remove the tire valve cap.
When replacing the valve core, the air of the tire may escape so please remove the tire (wheels) or jack up the car.
DIY step 2 Check valve core
If you remove the valve cap, the valve core will be seen, so please add some soapy water to the valve core section of the valve core.If the air is leaked, you can replace the soap water with small bubbles.
Please use soapy water and similar to after replacement.
DIY Step 3 Remove the valve core
Use a bug screwdriver to remove the valve core.
As you remove the screws, you can turn it to the left to release it.
DIY step 4 Replace a new valve core
The replacement valve core is installed as well as using a bug-driver.After installation, inflate the specified air pressure.If you can check if there is no air leakage, the work is done.