Feature

●Country of Origin: China
●Color: BLK (blast black)
●Size: S 6.1 inches (155 mm)
●Supported mounting positions: 0.9 - 1.1 inches (23.6 - 29 mm)
●Weight: 2.0 oz (57 g)
●Mounting hardware included

[blast black]

[Brass Red]

[blast blue]

Description

PROX PX804 Tamo Holder Light; Size: M; Total Length: 6.8 inches (173 mm); Weight: 2.5 oz (70 g); Compatible mounting positions: 1.1 - 1.4 inches (29.9 - 35.3 mm); A convenient tool that can be easily attached to your small gaff or ball handle and quickly landing it in a vest or belt. The hook hanger part has a blasting finish, and the lineup includes a standard M size (compatible diameters: 1.1 - 1.4 inches (29.9 - 35.3 mm)), and a small diameter compatible with 0.9 - 11.4 inches (23.6 - 29.0 mm)). An attractive fishing tool with a value price.

From the Manufacturer

Prox Co., Ltd. is familiar with the catchphrase "Makes fishing easier..."

We offer fishing equipment that has never been seen and value for money.

Please take a look as we will describe the details about the products you have seen this time.

Cost effective Tamo holder light.

Released with an emphasis on cost performance, the Tamo Holder Light has been used by anglers until the present day has been released in 2012.

Very simple to use.Before use, simply attach the Tamo Holder to the shaft and insert the hook into the belt that is attached to the bottom and hook it up.To use, simply pull out the shaft and pull it out immediately.

The hook hanger part is blasted, and the color is finished.Available in 3 colors: Blast Black, Blast Blue and Blastred.

Available in Two Sizes

The Tamo Holder Light is an excellent product that can be easily attached to your small gaff or ball handle (shaft).Simply attach it to the shaft and insert the hook hanger into the bottom belt and youre set.Plugs into the belt for smooth landing when scooping fish.

The total length of the S size is 6.1 inches (155 mm), and the total length of the M size is 6.8 inches (173 mm), but if you see it alone, it may be very honestly the same as the real thing.

The S size fits delicate and narrow shafts (compatible with mounting positions: 0.9 - 1.1 inches (23.6 - 29.0 mm)), and the M size is intended to be installed on a standard shaft (compatible mounting position diameter: 1.1 - 1.4 inches (29.9 - 35.3 mm)).

Compatible with small and medium sizes with different shaft diameters.

Please tighten the 4 hex screws attached to the resin parts and secure them firmly.But please be careful not to overtighten it as the shaft will become poor or or damage the worst shaft.Do not use an electric screwdriver, please tighten it with your hands.The product comes with a hex wrench, so please adjust it well.

Here is a little back!If the shaft diameter is a little narrow and cannot be installed, it will be necessary to remove it, but if you use a masking tape or a thicker diameter to make it possible to install.If the diameter is thick... sorry!

We are not responsible for the shaft damage due to too much screws on the Tamo Holder Light.

Installation


Installation Method 1 Remove the included hex wrench from the package and remove the screws on the 4 locations of the Tamo Holder Light. The removal itself is not a problem with using an electric screwdriver, but please be careful to lose the screws when removing it. (If you lose your screws, you will find it at the official Prox online shop.)	Installation Method 2 Remove the resin part by removing the screw.Next, align the resin part where you want the shaft to be installed. Small and Medium sizes have different shaft mounting positions, so please buy with caution.	Installation Method 3 Install screws that have been removed with a hex wrench. If you tighten it too hard here, it will cause the shaft to come out and the worst shaft will break. Do not use an electric screwdriver and turn it with your hands.


	Tamo Holder Light Small	Tamo Holder Light Medium	Tamo Holder V3	Tamo Holder V3 Carbon
Total Length Size	155mm	173mm	173mm	173mm
Weight:	2.0 oz (57	70g	74g	66g
Supported Mounting Positioning Dia.	23.6mm - 29.0mm	29.9mm - 35.3mm	29.9mm - 35.3mm	29.9mm - 35.3mm
Adjustable mechanism	Not equipped	Not equipped	Equipped	Equipped
Hook hanger adjustment width	Non-adjustable	Non-adjustable	10.3mm - 13.7mm	10.3mm - 13.7mm

From the Manufacturer

Cost effective Tamo holder light.

Available in Two Sizes

Compatible with small and medium sizes with different shaft diameters.

Installation

Installation Method 1

Installation Method 2

Installation Method 3