Product Specifications (See product image 2 and 3 for details) Material: Sleeve: Oxygen-free copper tubing (electrotin plating); Insulator: Polyethylene, polyolefin Rated Voltage: 300 V; Maximum Insulation Used: 105 degC; Uses: Automotive, pumps, marine, appliances (washing machines, kitchens), etc. Can be used in places where waterproof, oilproof, shockproof, and dustproof, etc. Used Wires: Can be used with most electric wires, but the coating material is silicone rubber, glass braid, Teflon (FET, TFE, etc.), and fluorine rubber cannot be expected for adhesion effects.

1. Round terminal with waterproof vinyl insulation (straight / F shape / #10) / (Red) 5pc / (blue) 5pc / (yellow) 5pc 2. Waterproof vinyl insulated round terminal (straight / F shape / 1/4") / (red) 5pc / (blue) 5pc / (yellow) 5pc 3. Round terminal with waterproof vinyl insulation (straight / F shape 5/16") ·(Red) 5 pcs, (blue) 5 pcs, (yellow) 5 pcs, 4. Round terminal with waterproof vinyl insulation (straight shape, F shape, 3/8 inch), (red) 5 pcs, (blue) 5 pcs, (yellow) 5 pcs.

5. Waterproof insulated crimp connector, butt type, red 5pc, blue 5pc, yellow 5pc, waterproof insulation jacket, insulated tab on connector, male #250 series, red 5pc, blue 5pc, yellow 5pc, 7. waterproof insulation crimp connector, insert type #250 series (Red) 5pc (Blue) 5 pcs, (Yellow) 5 pcs, (Yellow) 8. Waterproof Insulated Crimping Connector with Y-type Terminal ·(Red) 5 pcs, Blue) 5 pcs, (Yellow) 5 pcs.

Precautions for use (waterproof)

Heat the insulator at approximately 246°F (120°C).Direct flame may cause burnt or uneven shrinking.In addition, avoid overshrinking (over 5 minutes if the electric furnace is 284°F (140°C), ). Heat should be added from the center of the crimp part to the edge, while rotating. The estimate of heating is to finish the internal layer agent slightly more than the insulator. Waterproof products are heat shrinkable, so please be careful when storing them.Please avoid placing in direct sunlight or near heating equipment. Avoid overshrinkage to prevent the insulator from shrinking or tearing.

Please consider it together.

1. Waterproof crimp sleeve crimping tool IWS-2210H

↓↓

www.amazon.co.jp/dp/B07XFMK7RR

2. Crimping Tool Ratcheting Crimp Connector Set

IWS-2210H-KIT↓

www.amazon.co.jp/dp/B07QKVKTN4