A set of couplers for flat terminals 110 type male and coupler terminals.
Tab-in-tab connectors securely connect wires and wires for easy removal and removal
For repairing headlight bulb connectors with 4 types of couplers depending on the application.
■Quantity
150pcs 110 female | 150pcs 110 male 2 poles 3 poles 4 poles 6 poles coupler male female 10pcs each
■ Compatible wire
110 Model 20-16AWG / 0.50-1.25sq
■ Usable power
DC 12 V 140 W or less, DC 24 V 280 W or less.
■Features
This 110 type connector is convenient for wiring work and electrical equipment.It is easy to put on and take off, and the wiring finish is greatly improved.Set of 4 types of 2 poles, 3 poles, 4 poles, and 6 poles.Comes with a case for convenient storage.
-
Material: Brass/Tin Terminal: #110 Female 0.02 inch (0.5 mm) thick
-
STEP 1: Temporarily press metal terminals with a crimping tool.
Before attaching the terminal to the wire, keep the insulation sleeve first.Please choose the "crimping hole" that is suitable for the tool side.Set the terminals into the dice.Close the head to keep the pin from coming off.
STEP 2: Insert the cover.
Insert the stripped wire from the barrel side of the terminal.Firmly grip and crimp the grip.Just squeeze the ratchet to the end and crimp is done.The ratchet will unlock if you squeeze it tightly.Head opensAfter checking the condition, pull up the sleep and youre done.
-
Note
Please ensure that the terminals are connected using a dedicated electrician plier. In case of crimping failure, the cord may be removed or short-circuit. After connecting, please check the condition regularly and replace it if there are any abnormalities. When connecting wires, please ensure insulation with a sleeve. Specifications and appearance may change without prior notice in order to make improvements. Do not use for anything other than the intended purpose.
This product is for automobiles only.Please check regularly after installation and replace if there is any abnormalities.Please do not use in areas where water may cause rust, corrosion or short-circuit.Please turn off the power supply.
This terminal female is not intended for couplers, so it is a type of insulation with a male and female connection sleeve without the use of a coupler.Use it for couplers for extra fun.