Feature
●Recommended by active carpenters. Bimetal Hole Saw, Diameter 0.7 - 3.0 inches (18 - 75 mm), Increment, Set of 12
●Carefully selected items that are frequently used. 18mm, 20mm, 24mm, 28mm, 30mm, 35mm, 38mm, 45mm, 50mm, 55mm, 65mm, 75mm
●Compatible with a wide range of materials. Can be used for drilling holes in aluminum plates, iron plates, wood, plastic, gypsum boards, etc., so it can be used by both beginners and professionals
●Easy to clean even for the do-it-yourself beginner. Comes with a center drill and a spring that is suitable for drilling. The thin blade design reduces cutting resistance and allows for rapid drilling
●Material: HSS Center Drill with Spring (Please Read Important Note) Impact Driver, Vibration Drill, Cannot be used with 3 Jaw Chucks, Chuck Diameter: 0.4 inch (10 mm) Drills (Not for 0.25 inch (6.35 mm) Hex Shaft / Impact Screwdriver)
●Applicable Materials: Aluminum plate (less than 0.1 inch (3 mm) ), iron plate (less than 0.1 inch (3 mm) ), wood, plywood, PVC board, plastic, gypsum board, etc
●Precautions for Use: Use vertically against the material. Do not tilt the drill in the middle Please wear protective gear such as goggles and mask when working. Please do not touch the hole saw with bare hands as it may cause burns
[12]
[16]
[6]
[8]
Description
Material: HSS center drill, spring included, M42 material is used for the cutting edge. Please be sure to read: Impact screwdriver, vibration drill cannot be used. For 3 jaw chucks, chuck diameter: 0.4 inch (10 mm) drill can be installed (not for 0.2 inch (6.35 mm) hex shaft); Target materials: Iron plate (0.1 inch (3 mm) or les), stainless steel, aluminum plate, wood, plywood, polyvinyl chloride board, plastic, etc. For parts Use vertically. Do not tilt the drill in the middle Please wear protective gear such as goggles and mask when working. Please do not touch the hole saw with bare hands as it may cause burns.