Feature
●Drive Type: Only Compatible with M.2 SATA NGFF B-Key & B+M Key,Support UASP Protocol ★Note: It does not support M.2 M-Key, NVMe interface
●High Speed Transmission: USB 3.1 GEN2 standard transfer rate is 10Gbps, compatible with USB3.0/USB2.0/USB1.1
●Compatible Hard Drives: M.2 NGFF SSD 2230/2242/2260/2280 *If you are not sure whether it is faulty or support SSD, please contact us via email: support@fideco.cn
●Support System: Support Windows/MAC OS/Linux System
●Excellent heat dissipation:External dimension-L102.5*W34*H12mm One side cooling design, increase the heat dissipation area, extra air vents on both sides, better thermal design can improve the performance of your hard drive and prolong the life of your hard drive
[M203CS: SATA SSD Case]
[M203CP: NVMe SSD Case]
Description
FIDECO M.2 SATA SSD External Case - Slim & Lightweight & Portable
Drive Type: Compatible with M.2 NGFF SSD(B-Key & M+B Key)Note: Does not support M.2 M-Key, PCIE/NVMe interface.Excellent heat dissipation:External dimension-L102.5*W34*H12mmOne side cooling design, increase the heat dissipation area, extra air vents on both sides, better thermal design can improve the performance of your hard drive and prolong the life of your hard drive.
High Speed Data Transfer: Adopts the USB 3.1 Gen 2 interface, can reach up to 10Gbps.Compatible with USB3.0/USB2.0/USB1.1.Depending on the performance of the PC and SSD, there may be slight differences between the actual transfer speed and the theoretical speed of the case.Excellent Performance: M.2 SSD external case adopts USB 3.1 Gen 2 interface, support UASP (USB Attached SCSI Protocol).When used with UASP compatible computers, it can provide faster data transfer than USB 3.0.
Compatible with multiple systems, such as Windows, Mac OS, Chrome OS, Linux, and so on, no need drive, just plug and plug it into and recognize.It has a wide range of uses, such as PCs, routers, PS3/PS4, XBOX series, smartphones, etc.
Compatible with USB Type-A and Type-C
The M.2 SSD external case has a USB Type-C port and can be used on platforms with USB Type-A or Type-C port.
|
|
|
|
|---|---|---|
|
Installation Instruction 1. Remove the cover on the back of the main unit. 2. Put the hard drive into the case (push it in the direction of the notch). 3. Fasten your hard drive with a zipper. A: Insert the zipper slot into the hard drive (circuit board) B: Push the fastener into the fixed hole of the hard drive enclosure (fixed hole may vary depending on the size of the hard drive) 4. Install the cover on the back of the main unit. |
How to remove 1. Remove the cover on the back of the main unit. 2. Take out the hard drive. A: Push down the end of the zipper and turn the zipper slot upward. B: Lift the end of the hard drive and take out the hard drive |
Product Specifications 1*M.2 NGFF Portable Hard Drive Enclosure 1 x USB-A cable 1 x Type-C interface 1 x Gold screw (lock SSD) 1 x helix 3 x Replacement Screws 1 x Instruction Manual |
