[1kg]

A safe leak-proof agent that can also be used on dishes. Compliant with tap water quality standards in accordance with the Ministry of Health and Welfare Ordinary No. 69. The waterproof coating gives it a little sheen. If there is dust, oil and water droplets on the object, the adhesion will be damaged, so please remove it firmly. Dip (dipping) the liquid ceramic solution into the target object and allow it to penetrate thoroughly. When dipping (submerging), it is estimated for about 5 minutes, but please adjust it accordingly. When applying with a brush, brush, or spray, please ensure sufficient penetration until the suction is disappeared. The object should be thoroughly cleaned with a cloth, then gently wipe it off and allow it to air dry in a well-ventilated place at room temperature for at least 12 hours. If you apply too much or more twice after drying, there may be a white crystal on the surface. ● We recommend storing the used solution in a separate container from the unused solution It is a weak alkaline solvent that is weak to the skin and mucosa. It is recommended to use protective gear such as gloves when working. It is a water-soluble solvent that is not volatile, non-toxic, or ignitable, but should be used in a well-ventilated place as possible for long periods of time. It is extremely effective in porous water repellent and waterproof treatments such as porcelain, tile, brick, tile, concrete, mortar, paper, fabric, wood, etc. but not versatile. Please test it before use. Heat resistant up to 122°F (500°C). Please avoid using on objects that are heated above 1122°F (500°C) or on direct fires. It can be used in microwave and oven dinnerware, but due to the effects of ingredients may cause burns and surface deformation. Long-term outdoor use will deteriorate due to UV rays. Not permanently waterproof.