Feature
●Easy to use: Can be installed quickly by hand or using pneumatic tools
●Effect: The screw has a large pulling resistance and a wide grip range. Can be used to assemble uneven surfaces
●Instructions: 1. Drill a hole to the recommended diameter. 2. Tap the anchor to the hole until the anchor is flush with the surface of the board. 3.Install the setting tool to the screw head. Squeeze the trigger to expand the anchor. (Small size can be set with a screwdriver) 4. Remove the screws, thread the fixture and then put it back into the anchor. Tighten the screws until the fixture is fixed
●【Size Chart】Screw Length: 25mm / 0.98 inch, Bushing Length: 18mm /0.71 inch, Hole Diameter: 10mm / 0.39 inch (M5); 12mm / 0.47 inch (M6)
●(Quality Assurance): In the event of an initial defect, please feel free to contact us. We will do our best to make you satisfied
[M5X25]
[M6x25]
Description
Description:
- Quick installation with manual or pneumatic tools.
- - Easy to use
- - Wide grip range
- - Large pulling resistance
- High breaking load
- - Can be used to assemble uneven surfaces
- Instructions: 1 Drill holes to recommended diameter 2. Tap the anchor to the hole until the anchor is flush with the surface of the board. 3.Install the setting tool to the screw head. Squeeze the trigger to expand the anchor. (Small size can be set with a screwdriver) 4. Remove the screws and thread them through the anchors before putting them back into the anchor. Tighten the screws until the fixture is fixed.
Specifications:
- Material: Steel
- Size: M5, M6
Size Chart:
Screw Length: 25mm / 0.98"
Bushing Length: 18mm /0.71in
Hole Diameter: 10mm / 0.39in (M5); 12mm / 0.47in (M6)
Package Includes:
20pcs Petal Expansion Nuts (with Screws)
Note:
1.Please allow slight deviation due to manual measurement.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
3. Wish you a wonderful online shopping!