Great assistance in stable work on the workbench
[Use]
Securing processed materials on the workbench workbench
Features:
Using holes on the workbench workbench can be used to fix processing materials easily and securely.
Made of resin material, it can be fixed without damaging the processed material.
Even thick materials can be fixed up to 2.0 inches (50 mm).
Securing processed materials on the workbench for cutting, polishing, and bonding work.
Using the holes on the workbench workbench, you can easily and securely fix different materials to various angles.
Made of resin material, it can be tightened without damaging the processed material.
Even thick materials can be fixed up to 2.0 inches (50 mm).
|
|
|
|
---|---|---|---|
(1)Press the lock button on the bench clamp to remove the sliding clamp. Loosen the fixed lever. Depending on the work, place the material on the workbench and insert the bench clamp into the hole near the material. |
(2)Adjust lever fixtures and clamps to hold the material. While holding the lock button, push the slide tightener up until it hits the workbench, and rotate it about 1 to 2 times to temporarily tighten. |
(3)Once the material is properly positioned, use the fixing lever to tighten the material. |
When applying large materials or adhesions, please use 2 to 4 pieces and multiple bench clamps. |