Feature

●Brand : XINPUGUANG
●Material : Monocrystalline Silicone
●Item Weight : 2.25 Kilograms
●AC Adapter Current : 5.71 Amps
●★(Lightweight):The solar panel is light weight 2.03kg, the thickness is 3mm. Easy to carry
●★ (Scope of application) It can convert light energy into electrical energy suitable for unreachable places, such as oceans, islands, deserts, and mountains. Solar panel can also be used as an emergency power supply
●★ (Good Performance) Solar panel has high power generation efficiency, Class A crystal silicone cells have 19.8% conversion rate
●★(Practical) Solar panel and PV cable are IP65 waterproof and designed for outdoor use. Can be used for a variety of applications including residential roofs, balconies, motor homes, campers, marines, special equipment vehicles, camping, tents, emergencies, etc
●★(Easy and Quick): Easy to carry, hang and disassemble. Unique frameless design and 4 metal reinforced mounting holes for easy installation It is lightweight and has a frameless construction for easy panel transfer and storage

Description

Solar panel

Power (Pmax): 100W

Open Voltage (Voc): 21V

Short circuit current (Isc): 6.28A

Power supply voltage: 17.5V

Power supply current (inp): 5.71A

Operating Temperature (NOCT): 45 ± 2 °C

Temperature Range: -40℃ to +80℃

Weight: 4.9 lbs (2.25 kg).

Size: 36.6 x 26.0 x 0.1 inches (930 x 660

Standard test conditions: Radiation level 1000W/m2, temperature 25°C, AM = 1.5

Controller Specifications

Voltage: DC 12V / 24V

Rated charging current: 20A

Overcharge Protection: 14.4 V / 28.8 V

Overcharge Floating Charging: 13.7 V / 27.4 V

Charging Recovery Voltage: 12.6 V / 25.2 V

Over discharge protection: 10.7V / 21.4V

USB Output: 5V/2A.

Size: 5.9 x 3.1 x 1.4 inches (150 x 78 x 35 mm).

Battery use:Lead acid battery,Lithium battery

Wiring Method and Precautions for Solar System Kit

1. The connection of the solar system kit can be divided into parallel connection and serial connection.The controller must connect the battery first, then connect the solar panel.

2. When connecting solar panels in series or parallel, you must pay attention to the PV input voltage of the controller.Voltage connected parallel to the controller after series connection cannot exceed the input voltage of the controller.

3. The total input power of the solar panel should not exceed the rated power of the controller.Otherwise, the controller may burn out.

4. When the cable is connected to each component, the connection is stable and there is no loosening.

<5> To prevent damage to the solar panel, the positive and negative poles of the solar panel cannot be shortened by the same series of connections.

6. Please check the positive and negative poles of the controller and battery clearly.Please do not reverse the positive and negative poles.

<7> If the rated power of a single controller is not enough to meet all solar panels, you can connect multiple controllers to the battery at the same time.

8. The inverter cannot be connected to the controller, and it needs to be connected to the battery.

Application of Solar Energy