Manufacturer: Wakai Sangyo
Model Number: JBA412T
Product Name: Just Board Anchor
Open leg type (casa type) metal anchor, plywood board wall anchor.
Compatible board thickness: 0.4 - 0.5 inches (9.5 - 12.5 mm)
Anchor/Screw Count: 200 set
Square box included.
[Note]
Please use the included screws or M4 ISO machine screws with the mounting thickness + 1.0 inch (25 mm) or higher.
Do not use on ceilings.
This anchor will significantly reduce the strength caused by excessive leg opening and lack of legs.
When installing, please be sure to wear safety glasses and safety protective equipment.
Please check the thickness of the wall and use within the appropriate board thickness.
Please be aware that the bits after use will become high temperature.
Cannot be used for anything other than GB-R. For use with other than GB-R, drill a hole with a 0.4 inch (9.0 mm) diameter.
After drilling, if you turn the screw in an incomplete position of the nail, it may damage the wall, so please push the anchor with the rotation of the anchor until the nail is fully attached.