Connect one side connector to a 8mm wide single color LED strip light (single color 3528/2835) The other side can be connected to the DC plug of the adapter.
Allows you to connect the cut portion of the tape light without soldering
Open the cover of the connecting connector to reveal a single color double core contact.
Insert the conductive surface of the connected tape light into contact with the contact.
Tape is connected when the cover is closed.
Installation Instructions:
1. Precisely cut the tape cutting position.
2. Remove the adhesive strip from the connector length and set the tape.
3. Slide the contact part slightly to confirm surface biographical contact.
4. When the lid is firmly closed, it can be used well.
Note:
After inserting the LED strip light into the connector, before closing the connector cap, please pull the LED strip light lightly to adjust the connection point until the LED lights up. If the LED does not light up, press the two metal contacts on the connector slightly until the LED lights up with your finger. Loose connections will reduce conductivity, and the LEDs will flicker or color conflict.
Package Includes:
10x Solid Color SMD 3528 or 2835 LED Strip Light DC Jack One Touch Connector