[W1 & 2×50mm ロング]
[W3 & 8×40mm ロング]
[W3 8×40mm]
[W1 2×50mm]
Easy to pull out the punch anchor on the main unit.
Product Size:
Width 0.5 inch (13 mm) x Height 4.1 inch (106 mm) x Depth 0.5 inch (
[Use]
Removing embedded anchors
Features:
The main unit of the loading anchor W1/2 can be removed with a bit attached to the impact screwdriver.
The 6.35 hex shaft allows you to connect directly to the impact driver.
The neodymium magnet on the tip allows you to remove the remaining cone after removing the anchor.
[Precautions]
Excessive impact with an impact driver may cause damage. Anchor and bit screws must be securely fitted before turning