Feature
●Uses: Drilling holes in plywood, plywood, etc
●Drilling size: 1.0, 1.3, 1.5, 1.8, 1.8, 2.0, 2.4 inches (25, 32, 38, 45, 51, 5
●Drilling Thickness: 0.8 inches (20 mm)
●Compatible models: Rotary drill (electric drill/charging drill driver) 0.4 inch (10 mm) chuck or above
●Specifications: 0.3 inch (8 mm) hex shaft
Description
You can drill holes in 7 sizes.
[Use]
Drilling holes in plywood, plywood, etc.
Features:
The body is thick and has a reinforced rib for excellent durability.
Uses a sharp Japanese blade.
[Precautions]
Do not use with impact drivers.
The blade or body may be damaged.
Only for forward rotation (left rotation) and reverse rotation (left rotation) cannot be used.
The tip of the blade is sharp, so please wear gloves to attach or remove them and do not touch them with bare hands.
From the Manufacturer
You can drill holes in 7 sizes.
[Use]
Drilling holes in plywood, plywood, etc.
Features:
The body is thick and has reinforced ribs for excellent durability.
Uses a sharp Japanese blade.
Supports maximum hole plate thickness 0.8 inch (20 mm).
Specifications:
- Drilling size: 1.0, 1.3, 1.5, 1.8, 1.8, 2.0, 2.4 inches (25, 32, 38, 45, 51, 5
- Drilling Thickness: 0.8 inches (20 mm)
- Compatible models: Rotary drill (electric drill/charging drill driver) 0.4 inch (10 mm) chuck or above.
- 0.3 inch (8 mm) hex shaft
How to use
1. Stop rotation once before the saw part hits the wood plate.
2. Hold the drill firmly and slowly cut the wood board 2-3 degrees with the saw blade.
3. After injury, press the drill vertically and slowly deepen the holes.
|
|
|
|
|
|---|---|---|---|---|
| E-Value 7 Blade Hole Saw for Woodworking 0.8 inches (20 mm) | SK11 Corded Electric Drill SD-300AC Keyless Chuck 100V | SK11 SDD-180V-15RLS Charging Drill Driver 18V with Case, Charger, Battery | SK11 SDD-144V-RLP Charging Drill Screwdriver 14.4V | |
| Product | Woodworking Hole Saw | Corded electric drill | Charging Drill Screwdriver | Charging Drill Screwdriver |
| Application | For drilling veneers, linens, wood boards, etc. | Drilling and Polishing | Woodworking and ironwork for various drilling, tightening, loosening | Woodworking and ironwork for various drilling, tightening, loosening |
| Working Capacity (Drilling Holes) | - | Woodwork: 1.1 inches (27 mm), (iron) 0.4 inches (10 mm) | Woodwork: 1.1 inches (27 mm), (iron) 0.4 inches (10 mm) | Ironwork: 0.4 inch (10 mm), Woodwork: 0.7 inch ( |