Feature

●M2 x 3.5 x 4.5 [FB-204545] (Nominal diameter of inner screw x outer diameter x length [mm])
●Inner screw = Coarse [Pitch: Approx. 0.02 inch (0.4 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M6×8.0×10.0 [FB-6001]]

Description

■ Shape: Press-in-type insert
Insert nuts that require drilling holes in the resin and press them into place.
Embedded methods include pressurized input, thermopressure input, thermoset resins have pressurized and expansion methods, and each has a pressurized insert nut that is suitable for respectively.

■ Thread Shape: Coarse
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.

■Material: Low cadmium brass
Earth friendly brass with a low concentration control of the cadmium content prescribed by RoHS Directive as a Hazardous Usage Restrictive Substances.
The mechanical properties are identical to regular brass, with excellent conductivity and corrosion resistance.
Surface treatments such as nickel plating provide better corrosion resistance and decorative appearance.

■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.

Product Features:
Flange Bit Insert
● One side of the press-entry insert nut has a flange (brim)
● Easy to use, good holding power, cost and balance in all aspects.
● When pressed, the product is directive.
● The width and number of knurling parts will vary depending on the total length of the product.