Feature

●[Max Speed]: The maximum linear speed of this DC 12V stepping motor is 25mm/sec.
●[MOVE 0.25mm IN 1 STEP]: The stepper motor can move 0.25mm in one step. You can use a micro step driver if needed.
●(General Purpose) Widely used in small devices such as medical equipment, laser engraving machines, etc.
●Warm Note: A4988 driver (sold separately) is required to drive the motor, but cannot be directly connected to the power source
●[100% Satisfaction Guarantee]: If you have any problems or suggestions about this product, please feel free to contact us by email. We are sure to give you a satisfactory solution and you will never be lost.


Description

Function:

-100% brand new and high quality.

-0.25mm move in one step, you can use the micro step driver as needed.

- Maximum linear speed is 25mm per second.

Widely used in small equipment such as medical equipment, laser engraving machines, etc.

-Requires A4988 driver (not included) to drive motor, can not be directly connected to power source.

Specifications:

Model D8-MOTOR80

Drive Voltage: DC 12 V (Drive: 16219)

800 ma/phase current per phase

Coil resistance 15 10% Ω/phase

Phase Count: 2 Phase

Step Angle: 18. / Step

Excitation Method: 1-2 phase excitation

Drive mode: Double pole drive.

Drawer thrust: Over 17.6 oz (500 g), 125 pps.

1600 pps above maximum response frequency

1100 pps above maximum start frequency

Insulation Class E

Insulation strength: 100 vac 1 second.

Insulation Resistance: 50M DC 500V

Operating temperature: 0 to + 55 degrees Celsius

Motor surface temperature: 176°F (80°C).

Thread rod diameter 0.1 inch (3 mm)

Thread bar length: 3.5 inches (90 mm)

Slide Block Stroke

Threaded pin pitch ± 0.02 inches (0.5 mm)

Length:10.3cm/4.1in

Weight: Approx. 1.8 oz (50 g).

Package Includes:

1 x motor with linear slide