Feature

●Thickness = 6mm x Length = 17mm
●Thread part = Coarse [Pitch: Approx. 0.04 inch (1.0 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M6×17]

Description

■Shape: (Hex Hole) Joint Connector Nut [JCN]

A "joint connector nut" with a hex hole is used when connecting parts and parts of assembly. Use "Joint Connector Bolts (JCB)" for the male thread end.
■ Thread Shape: Coarse

It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
■Material: Iron

Iron is steel. Steel is an alloy of iron containing less than 2% carbon.
Although it is commonly used in many circulations, it is cheap materials, but due to the downside of it is easy to rust, many surface treatments will reduce corrosion.
■Surface treatment: Nickel

Widely used for decoration plating to give it a shiny shine. However, it is not as rust resistant as electrogalvanized and chromate treatment.
The color is "silver" and slightly yellow.