Feature
●Color: Clear
●Material: 1 component special modified silicone sealant
●Volume: 3.4 fl oz (100
●Made in Japan
●Tack Free: 60 minutes
[toilet]
[For weed control]
[for water]
Description
Features:
By filling the bowl and floor skimmer, it prevents urine penetration and seals the smell of urine.
When removed from the pack, it is gel, but when it hardens, it becomes rubber.
After it is cured, it can be removed cleanly, so if it gets dirty, you can throw it away.
Easy installation without the need for a cartridge gun.
Transparent and discreet installation.
[Use]
For filling bowls and floors.
Apply to toilet and floor skimas to block water and urine infiltration
Fill the gap in the toilet to prevent stains and odors.
Sealing gaps for toilet bowl.
From the Manufacturer
Apply to toilet bowl and floor skimmer to block water and urine infiltration
[Use]
Adhesive for attaching lightweight fixtures to the gaps between the toilet and the floor. For masking 3D masking work and dirt prevention coating material
Removable, moisture curing adhesive
(Hardens to a rubbery with excellent rubber properties)
■ Since it is a paste, you can freely adjust the shape and volume.
- Can be used on uneven surfaces and curved areas.
■ After installation, if the paste is hardened, it can be peeled off, so it can be removed cleanly when not needed.
■ After hardening, it is strong against water, so it can also be used for installation around water.
- Clear type that is hard to notice.
Precautions for Use:
3mm thickness needs about 24 hours at 23 degrees for full hardening.Make sure it is fully cinched to the inside.Use it out after opening (it will harden inside the pack even when stored).Do not touch or touch anything until it is completely hardened.
- Volume: 3.4 fl oz (100 ml).
- Color: Clear
- Container: Pouch
- General name: Moisture curing type 1 component special modified silicone based general purpose adhesive.
Product Specifications:
|
|
|
|
|---|---|---|
|
|
|
|
How to Use:
|
|
|
|
|
|---|---|---|---|
1. Apply masking tape.Clean the toilet bowl and floor skimmer and paste the masking tape. |
2. Squeeze the skimmer fill.Drill a hole in the pouch and tighten the nozzle. Squeeze it with your hand and slowly serve it in skima. |
3. Spatula.Do not touch or touch anything until it is completely hardened. |
4. Peel off the masking tape.When peeling, make sure it is completely cling to the interior. |
