For Through Holes:
1. Clean and dry the screws (bolts and nuts).
2. Select the right strength screw loosening agent.
3. Insert the bolts into the thru hole of the mounting part.
Apply a screw loosener to the position of the bolt to tighten the nut.
4. After tightening, wipe off excess liquid with a damp cloth.
For Bag Holes:
1. Clean and dry the screws (bolts and bag holes)
2. Select the right strength screw loosening agent.
3. Apply an appropriate amount of screw loosening agent to the bolt and put a few drops of liquid into the bag hole to tighten.
4. After tightening, wipe off excess liquid with a damp cloth.
Precautions for Use:
Wear protective equipment to prevent it from adhering to the skin or eyes.
Keep out of reach of children.
If accidentally swallowed, do not force vomit and consult a physician.
In the event that it gets in your eyes, wash your eyes for at least 15 minutes, and then consult a doctor.
If it gets on your skin, rinse thoroughly with soap and water.
Do not use for anything other than adhering.
Use in well-ventilated areas.
Do not use on thermoplastic plastic (acrylic, ABS, etc.)
Do not use on pure oxygen or oxygen systems.
Do not return any liquid that has been transferred to the saucer or other product to the original container.
Do not mix with other substances.
When storing, store in a cool and dark place with the raw container.
(Hazardous Materials of the Fire Act)
Keep away from fire
Class 4 3 Petroleum
Hazard Grade III