Function:
1 Using all metal gears, DC gear motor with wear-resistant, silent and long life
2. Solid copper coil stator and rotor, deceleration resistance and conductivity are strengthened and increases motor twisting
3 Over current protection, this brushless motor has a current of 3A
Automatically shut off when it reaches 4. Apply high temperature grease lubricant with low friction, noise reduction, slow temperature rise properties to extend gear life
5 There are two magnets inside, high residual magnetic, high coercality, high magnetic energy loss, high performance, high torsion characteristics, can improve motor performance.
Specifications:
Item Type: DC Gear Motor
Model: XD-42GA755
Material: Copper
Output Shaft Size: Approx. 8 x 20mm / 0.3 x 0.8in
Insulation Resistance: After rated at normal temperature humidity, the insulation resistance between the coil and motor shell is measured with a DC 500V resistor meter that does not exceed 20 MΩ.
Insulation resistance voltage: After rated operating at room temperature and humidity, mark 50Hz or 60Hz between coil shells for 1 minute, abnormal is 1500V.
Temperature rise: Usually install the gearbox or equivalent heatsink and use the resistance method to measure the temperature of coil less than 70 degrees Celsius to operate at room temperature or humidity.
Insulation class: Class B (284°F (130°C)
Operating Environment Temperature: Motor: -10 ~ + 40 ℃ (no freezing)
Operating Humidity: Less than 85% (condensation).
CW / CCW:Yes
Speed Azu
a>