This is a CWR60 wire rope cutting machine that manually cuts wire ropes up to an outer diameter of 0.2 inches (6.0 mm).

Compared to the previous product (IWS-102), the hardness of 2 blades is raised to HRC61, and it can also be used for wires.Also equipped with ratchet function and ratchet release feature, making it easier to use.

Cutting width (for reference only! )

Wire rope, copper wire, coated wire (mild steel): up to Φ 0.24 in (6.0 mm)

Stainless steel wire #12, piano wire (hard steel): up to Φ2.5mm

Product Length: 9.1 inches (232 mm); Weight: 15.3 oz (440 g); Uses: For cutting wire ropes, piano wires, bicycle outer cables, inner cables and cables with multiple cores and single cores.

Features:

Toggle mechanism reduces grip strength

Convenient wire rope cutter function.

Made with German special steel with a hardness HRC61.

If the blade wears out, it is possible to replace the blade only.

Unique labor-saving mechanism

Equipped with a new ratchet mechanism.Handle will not open until it is completely cut.Can be cut with little force.If the ratchet is disassembled, if you do not chew the sleep, you can lightly remove the lock by folding the lever with a small nut at the base of the handle with a screwdriver or similar to the release lever.

grip

TPR gripIt fits nicely in your hand and is less burden, making work smooth and smooth.

Energy-saving and compact

Equipped with a new ratchet mechanism, the handle is short and the small pocket size makes it easy to carry.

Attention to Material

Uses special steel that boasts a high hardness (HRC61) that is extremely difficult to handle.Double-edged for long life and durability.Mechanical mechanism alloy is used in the reception part to ensure reliable and speedy crimping.

Lockable

Lock hold function to prevent blade chipping during storage (grab and lockEasy to operate. )

Step 1: Wire rope cutting

Wire rope cut location.Cut with wire rope cutter.

Step 2: Making a sleep ring

Run the wire to sleep.Make loops as you need.

Steps 3: Crimping

Wire rope crimper (sold separately), press the sleep vertically in the middle of the sleep and press it.Apply pressure until the alligator is fully closed.

Step 4: Check the condition of crimping

Do two squares if necessary.

iCrimp

This is a Sabra brand that has been upgraded by IWISS based products from IWISS, which are mainly sold as a base product of pliers and benches.

The eye crimp wire cutting machine CWR has been conducted through cutting test before shipping.Please be aware that there may be cases of cutting wire debris left on the blade due to cutting test.