Feature

●84x84 Dot Matrix LCD, 4 Line Letters
●Used serial interface and communication master processor, number interface signal line greatly reduced, only 8 signal line power and GND Support MCU types, SPI, MC51 serial mode 0 AVR. Up to 4 Mbps transfer rate, so full speed write-on display without data
●You can use the conductive adhesive to connect modular printed boards and cables. Very easy to install and replace
●The LCD controller/driver chip is bound to the LCD chip, and the volume LCD is small
●Low power supply, operating current less than 200μA in normal situation, and has a power down mode


Description

Product Specifications:
- Power supply voltage: 2.7V-3.3V
-Data Interface Level: 2.7-5V
-Backlight Power Voltage: Max 3.3V
- Size: 43.6mm x 43.1mm (WxH)
-Installation Diameter: 2mm

Package Contents:
1 x 5110 LCD Display Module 84x84 Dot Matrix

Product Description:
RST-reset.
Selection of CE-chip
Selection of DC-Data/Orders
DIN - Serial Data Line
CLK-Serial Clock Line
VCC-Power input (3.3 V and 5 V can be experimentally verified, no problem).
BL-Back light control terminal.
GND-Ground
The interface is serial SPI interface.

[Precautions]
1. Please be aware that you must have expertise in order to use this product.
2. We only sell our products, we can not provide technical support for our products.
3. The color and size of the actual item may differ slightly from the published images due to lighting and display settings.