[matte black]
[natural grege]
[brown (bronze)]
[white (off-white)]
[vintage green]
Product Size:
Width 3.7 x Depth 1.7 x Height 1.4 inches (9.4 x 4.2 x 3.6 cm)
Working Load:
If the load is applied to one side of the pillar, please use up to 22.0 lbs (10 kg). It may fall over. (Shelfboard weight is included when using shelf).
Working load is tested value. The conditions may vary depending on the location of the installation and the wood used.
Please do not hang your bicycle, TV or valuables as it may tip over.
Precautions before Installation
·This product is a part that joins the wood when the wood is not sufficiently long for the 2 x 4 adjuster that uses commercially available 2 x 4 wood (38 x 89 mm).
When using this joint part, the length of 1.0 inch (26 mm) will be extended.
Do not connect at least 2 places.
Precautions for Use:
This product is for indoor use.
Do not use in places exposed to direct sunlight, high temperatures, or in places with high humidity such as bathrooms.
Please do not place dangerous items, valuables, or items that may be damaged.
Do not crank or hang
The adhesion of deodorizers, air fresheners, cosmetics, hairstylists, acid detergents, alkaline detergents, oils and organic solvents (benzine, thinner, etc.) may cause degradation. Remove immediately
Please do not paint this product.
This product is for vertical tension only. Do not use horizontally.
If any abnormalities such as damage or cracking, please discontinue use immediately.
We cannot accept compensation for unavoidable forces such as celestial disasters, deterioration, modification, faulty or accidents due to incorrect use.