Feature
●Taper Tap Size: M9, Pitch: 1mm, Material: High Speed Steel (HSS)
●Our hand taps are suitable for through holes and can be used with a tapping wrench to tap new female threads or re-screwed damaged or clogged screws. Fine thread design
●Material of the taper tap: The taper tap is made of high hardness high speed steel. Suitable for machine tool tapping and can be tapped by hand. Good red hardness and wear resistance. The cutter bit is not easy to break. Fast tapping speed and high precision cutting removal Taper Style: Start the thread with the workpiece
●Features: 3 rows straight grooves, excellent shavings removal effect, sharp teeth and high strength without burrs, square handle style on the ends, convenient for clamping tools, round drill bit design. The small hole in the bottom allows the coolant to enter and achieve the purpose of cooling the taper tap. Straight flute tool collects slits into the flute during cutting. Designed for hand cutting applications of plastic, copper, brass, aluminum, sheet metal, and other materials
●Easy to use: When tapping, rotate the twister every 1/2 or 1 turn and flip it about 1/2 to make sure that the shavings after the crushing is easily discharged. This prevents the taper tap from clogging due to the edge of the blade. We recommend adding coolant at the same time during this process. Do not touch the blade directly with your hand to avoid scratches
[2 M9 x 1.25]
[2 M9 x 1]
[01 M9 x 1]
[01 M9 x 0.5]
[01 M9 x 0.75]
[01 M9 x 1.25]
Description
Why Choose Our Hand Taper Taps?
Use high speed steel material with high hardness, good red hardness and wear resistance. It is one of the best materials for making faucets. Chip flutes are designed to prevent taps from overheating. This makes the drill bit easy to break when handling female threads. The parts have a square shank that is convenient for securing machine tools and fixings. Our taps are ideal for processing through hole female threads.
How to differentiate the taper tap from the bottom tap?
Taper Tap: Start tapping the square thread with the workpiece. Mainly used for thread processing through hole
Bottom tap: creates a screw thread at the bottom of the hole. Mainly used for female thread processing of stop holes. When processing stop holes, please note that the reserved hole depth is 1.5 pitch more than the required thread depth.
How to use it reasonable?
(1) When taping, insert the tap head first, match the center line of the tap with the center line of the drill hole.
(2) Rotate evenly with both hands, apply a little pressure and put the screw tap into the hole. No need to apply pressure later.
(3) Each time you turn the tap, you can flip it about 45° to cut out the shavings to prevent clogging.
(4) If the tap is hard to rotate, please do not increase the rotational force. The tap will be damaged.