Feature

●This IR transceiver kit allows you to send commands to the IR remote receiver if you have a proper decoder for Arduino project
●The infrared transmitter module is transmitted directly by a single tube and the waveform must be programmed modulated
●Based on 38KHz IR transmitter sensor It is easy to make your own IR controller with the IR receiver
●Adopts a highly sensitive 1838 remote control receiver. Luminous signal indicator LED makes it easy to observe and debug
●Applicable to a variety of platforms, including Raspberry pi / 51 / AVR / ARM


Description

Infrared Transmitter:
Supply Voltage: 5V
Signal Type: Digital signal
Infrared center wavelength: Approx. 850 nm - 940 nm
Infrared radiation angle: Approx. 20 degrees.
Infrared radiation distance: Approx. 4.9 ft (1.3 m) (5 V, 38 Khz).
Modulation: Direct transmit without modulation
Operating Environment: -4 to 185 °F (-25 to 85 °C)
Storage Temperature: -30 to +100 degrees Celsius
Wavelength: 940nm

Infrared Receiver:
Operating voltage: 5V
Output format: Digital output
Aperture: 0.1 inch (3 mm), 2 fixing holes for easy installation
Includes data indicator.
Size: Approx. 0.9 x 0.8 inches (23.5 x 21.5 mm).
Weight: Approx. 0.08 oz (2

Package Contents:
2 x IR Infrared Transmitter Module
2 x IR Infrared Receiver Module

Product Description:
IR is widely used for remote control.
With this IR transceiver kit you can send commands to the IR remote receiver if you have a proper decoder for Arduino project.
It is easy to make your own IR controller using the IR receiver.
Based on 38KHz IR transmitter sensor.
Can be used for remote control
Applicable to various platforms including Arduino / 51 / AVR / ARM

[Precautions]
Please be aware that you must have expertise in order to use this product.
Please note that we only sell our products, and we cannot provide technical support for our products.
The color and size of the actual product may differ slightly from the published images depending on the lighting and your display settings.