[Kaleidoscope]
[Red and Blue Green Arctic Light]
96 Red Patina Laser Patterns
Laser light source: 532nm green laser diode, 650nm red laser diode, 450nm blue laser diode
LED light source: 3W Blu-ray
Laser Level: Class 2
Electrical Supply Requirement: AC 100V - 240V, 50Hz - 60Hz
Adapter: DC 12V/1A
Machine whole power: 9W
Usage environment: 20 - 104°F (10 - 40°C) indoors.
Control mode: Manual, remote control
Working method: voice control, automatic operation.
Product Size: 4.1 x 4.1 x 2.3 inches (106 x 104 x
Product Net Weight: 0.36 Kg
Distance: 30 meters (Suitable for dark environment, laser brightness may be affected by other lights)
It provides two modes of automatic operation and operating according to the music.
Provides 2 operation methods: panel operation and remote control.
|
|
|
---|---|---|
|
|
|
|
|
|
|
---|---|---|---|
|
|
|
|
|
|
|
|
---|---|---|---|
Easy Installation:Lift the stand and place the machine on the table |
Sturdy packing box:Can effectively protect the machine from damage during transportation |
Multi-function Remote Control:Features to control the machine from a distance and achieve multiple changes |
Mount to the wall with a trim:Attach the beam to the laser lamp, then screw it into the wall, properly loosen the two knobs of the beam to the left and adjust the angle of the laser lamp as needed, and tighten the two knobs clockwise. |
USA FDA approved.This product belongs to the II laser products and may cause eye discomfort, so please avoid exposing the laser to the position of the mouth where the light emits it.This product is suitable for indoor use, and its protection level is IP20.Do not use in humid, overheating or dusty environment as it is suitable for dry environments.The product has good heat dissipation and should be away from flammable objects and liquids.
Please read all description before purchasing.Video and photos were created under fog effect in dark environments.The actual effect is much better than images that appear to be darker in the image resolution.Long running will shorten the life of the watch, but if you work for 4 hours, you will be asked to turn off the switch for 20 minutes.Keep out of reach of children.Do not look directly at the laserPlease follow the user manual during use.It is normal for the device to make a little sound because the motor is working.