Feature

●Product Specifications: Size (diameter): 7.1 inches (18 cm); Water fountain height range: 0.0 - 23.6 inches (0 - 60 cm)
●Selectable Modes: We offer 4 different nozzles to choose from. You can change the fountain mode and height by replacing the included nozzle. The height range is 0-60cm. You can freely choose the mode you like
●【Wide range of uses】This solar pump can circulate water to oxygen Mainly used to supply oxygen for fish pond, garden fountain, irrigation etc. Perfect for bird bath, aquarium, garden decoration, fish tank, pond or pool
●【Easy to install】Simply float the pump under the sunshine on the water surface. Once the solar panel gets sunlight, it will automatically work within seconds. The stronger the sun, the better the effect
●(How to Use) Please fill the pool with enough water to keep the pump completely underwater. Clean the pump regularly to ensure a great spray effect to prevent the pump from clogging with dirt. Fountain will only work when all panels are exposed to direct sunlight. If you have any questions during use, please contact seller directly from your order history


Description

Product Features

1. The solar pump is powered by sunlight and can be installed anywhere in sunny locations. Please note that the height of the fountain will vary slightly depending on the weather conditions (intensity of sunlight).

2. By replacing the included nozzle, you can change the fountain according to the mood and mood of the installation location.

3. When the water to suction, it can automatically stop the operation to prevent the idle of the pump from affecting the service life of the product. In addition, when the pump gets stuck with something, it will automatically shut off so you can use it with confidence.

How to use

1. Assemble the product.

2. Place the solar panel in a place that is adequately exposed to sunlight. The pump will work normally in about 3 seconds.

3. When started, air may enter into the pump and affect the fountain effect. It is recommended that you connect the pump to the nozzle after confirming proper operation.

4. To extend the life of the product, we recommend that the pump be disassembled periodically and cleaned