Feature

●It glides snow out of the car smoothly that impede your windshield vision
●You can reuse the double sided tape over and over again. Patented V-shaped construction allows for multiple vehicles
●Due to the construction of the wiper, the snow will remain in between the snow spail, but it will be extruded in sequence without stacking
●The snow veil does not interfere with the heat even if it is heated too far without direct flame, so it is possible to install it on vehicles with a level of difference in temperatures below 32°F (10°C)
●After pasting, please do not use it until it takes half to one day for the original maximum adhesion of the double-sided tape to achieve its maximum adhesion


Description

Does your windshield get stuck in the corner of the windshield? The snow spool makes the windshield barrier free and can be attached firmly as shown in the instruction manual, so it is effective for all vehicles. A small amount of snow remains between the wiper stopping position and the snow spail is not effective, but it is also designed to be extruded sequentially and fall down so you can drive safely and comfortably without the wiper failure. Since it is attached to the masking part of the windshield corner, the snow sveil and the snow remaining on the driver side will not enter the field of view at all, so you can check the car. Note: For cars with a minimum of 0.8 inch (2 cm) difference between the pillar and the windshield, it may be difficult to install. Please refer to the website for detailed application instructions at temperatures below 30°F (10°C). http://ww3.ctt.ne.jp/obatech/