Feature

●The wing shape and heat dissipation are very good, and the output power is large (48V input plus fan power can be around 1800W when the fan is added)
●The main power pipe insulation board uses high grade alumina, the thermal conductivity is 10 times higher than the insulation pad
●Using 100V 210A TO-247 package large power tube, large power reserve and good dynamic response


Description

Wingspool 1. is very good for heat dissipation is large output power (even when the fan is added, 48V input plus fan power is around 1800W).

2. Temperature control fan combined with hydraulic bearing fan is balanced for well noise and heat dissipation. When the load is light, the fan will rotate and reach a load temperature of about 60 degrees, the fan will not light up automatically. It can effectively reduce noise and extend the life of the product.

3. The main power pipe insulation board uses high grade alumina, the thermal conductivity is usually 10 times higher than the insulation pad.

4. Using 100V 210A TO-247 package large power tube, large power load, good dynamic response.

5. Double large iron silicone aluminum magnetic ring, 4 1.2 pure copper wire and lao, enamel low heat, high efficiency.

(See data handbook efficiency conversion curve for details) 6. New design, conversion efficiency is up to 98.1%.

7. Brand 3296W multi-loop potentiometer has high adjustment accuracy and small drifting.

8. Canton wire output current sampling, constant current temperature drift is small.

9. Low voltage protection, it can effectively protect all kinds of batteries, can also be used on solar cells, adjustable.

10. With constant current function, it can be used to charge battery cars to push up batteries.

11. 3 20A fuse output can protect the danger of accidental short circuit, connected in parallel.

12. Three indicators light: Low voltage, overcurrent, power indicator, at a glance.

13. High frequency capacity is used for both input and output. The output ripple is low heat, low and long life.

14. MLCC ceramic capacitors are added to the input and output, the output ripple is clearly reduced, and about 100mV when 48V to 72V 4A.