Specifications:
Material: Metal
Color: Multicolored
Voltage: 220V 50Hz
Power: 185W
Use: 5 minutes of continuous operation
Motor Speed: 20,000 rpm
Homogenizer Blade (Small): 0 - 20,000 rpm
Homoginal Blade (Large): 0 - 18000 rpm
Ambient Temperature: -10 - 45
Size: (L) x (W) x (H) 10.63 x 6.69 x 14.57 inches (27 x 17 x 37 cm).
Plug: China national standard plug (based on your country to send a corresponding adapter plug)
Instructions:
First, remove the mash rod, take out the mash cup, add the mash cup and solution to the mash cup, then stick the cup and place the rod, paste the rod, then lift the coupling so that you stick the rod. The end of the rod aligns with the shaft and closes the lid.
Look at the timer knob, turn on the ON (normally open) or the time position you want to specify and turn the speed control knob counterclockwise to the smallest position, then turn on the power switch. The indicator light turns on, then turn the Speed Control Knob to the desired speed and mix it evenly. It can be used at moderate and low speeds. You need to use plant mashing, high speed, fast smash.
If there is noise, when you change the solution, please repeat the above operation even if you turn off the power.
PREVENTION:
*This machine uses a three-eye safety socket and must be connected to the ground before use.
*You need to put the machine on a flat surface to prevent vibration while driving.
When grinding at high speeds, please use your hands to hold the lid. When the shaft slides up and down, it is difficult to spray one or two drops of oil to lubricate it.
* Hard materials such as mineral sand to crush bones.
*This machine adopts series excited motor. Its carbon brush is generally used for about 500 hours. It should be replaced in time to avoid the phenomenon of the rectifier being worn after the carbon brush is polished.
*When the machine is finished, rinse the cup upside down to dry and place it in the ventilation area.
Package includes:
Dispersion homogenizer x 1
4 x Glass Jars
2 x Nozzles.
1 x Nozzle Kit
3 x Brackets
(Excludes other decorations)
Notice:
Please allow slight deviation in the measurement due to manual measurement.
Due to different producing batches, product details may be a little different.
Due to the different monitor and light difference, the picture may not reflect the actual color of the item.
Please take into account the actual size listed in the listing to allow the photos to be enlarged and show details.