Feature

●Compatible models: Ninja 250/400 18-20
●Color: Hybrid (clear & smoke)
●Type: ICON
●Material: Elastomer resin

[clear VOLCANO]




[Hybrid (Clear & Smoke) ICON]




[Hybrid (Clear & Smoke) VOLCANO]




[clear ICON]




[black (black 19-3911tcx) VOLCANO]




[black (black 19-3911tcx) ICON]





Description

How to apply the stomp grip 1. Clean the surface of the stick. (When using clear, remove dirt and limescale with a compound, etc. before working) 2. Take off the surface of the application surface. 3. Positioning 4. Stick the edge to prevent air from entering. Please peel off the backing paper while sticking. If you want to use clear, please put the time on the edge slowly by step to avoid air bubbles. (If you apply the convex of the stomp grip one by one to squeeze out the air for a clean application without air) The Stomp Grip adhesive requires 24 hours for the adhesive strength to be stable. 72 hours required for full adhesion. If used before full adhesion, it may peel or slide off. Please be careful when using stomp grips that stick to the frame surface. When driving a vehicle with stomp grip, please drive with clothing that does not touch your skin directly to the stomp grip. If you drive with your skin directly in contact with your skin, you may experience injuries. The glue used in the stomp grip is very strong. If you remove the stomp grip forcefully it may damage the paint or peel. (It may be particularly cautious for older vehicles or repainted vehicles depending on the paint condition of your vehicle) To remove the stomp grip, please warm it with a heat gun and reduce the adhesive strength before peeling.



From the Manufacturer



Product description

How to apply the stomp grip 1. Clean the surface of the stick. (When using clear, remove dirt and limescale with a compound, etc. before working) 2. Take off the surface of the application surface. 3. Positioning 4. Stick the edge to prevent air from entering. Please peel off the backing paper while sticking. If you want to use clear, please put the time on the edge slowly by step to avoid air bubbles. (If you apply the convex of the stomp grip one by one to squeeze out the air for a clean application without air) The Stomp Grip adhesive requires 24 hours for the adhesive strength to be stable. 72 hours required for full adhesion. If used before full adhesion, it may peel or slide off. Please be careful when using stomp grips that stick to the frame surface. When driving a vehicle with stomp grip, please drive with clothing that does not touch your skin directly to the stomp grip. If you drive with your skin directly in contact with your skin, you may experience injuries. The glue used in the stomp grip is very strong. If you remove the stomp grip forcefully it may damage the paint or peel. (It may be particularly cautious for older vehicles or repainted vehicles depending on the paint condition of your vehicle) To remove the stomp grip, please warm it with a heat gun and reduce the adhesive strength before peeling.

Product information