Multi Heat Sink, Aluminum, W 0.5 x D 0.8 x H 0.2 inches (12 x 21 x 6 mm), Adhesive Sheet Included, IC-HS01

Product Features: Set of 4 small multi-heat sinks that can be used for heat protection. Small size, so you can use it anywhere. Heat protection with heatsink does not require electricity, and there is no need to worry about noise, operation or damage.If you feel your device is hot, please consider this product. Adhesive sheet included for easy application. Note: The adhesive sheet of this product is easy to arrange the installation environment, so it is not attached directly to the heat sink itself. Please note that if the product is installed as is, it will take a little effort to complete. Scissors are required to cut the adhesive sheet. The corners and edges of the heatsink are sharp.If you step on your feet you may cause injury. This is a fine product, so please handle with care not to accidentally swallow children and pets. Installation Method 1. Do not stick the adhesive sheet to the heat sink body beforehand and use the heatsink only to determine the installation location. Installation location is the most efficient cooling by placing it on a flat surface with no gaps in the heat sink. Less footprint makes the adhesive sheet easy to peel off.Please increase the footprint as much as possible when applying to curved areas, ceilings or walls. 2. Once you decide where to install it, cut the adhesive sheet to fit the heat sink.(*If the footprint is smaller, please cut it to fit the installation location.) 3. The back of the adhesive sheet has a blank release paper and the surface has a release paper with the text on it.Peel off the blank side first, stick to the back of the heatsink. 4. Peel off the release paper from the side of the letter, then stick the heatsink to the installation location.