Feature
●Car Silent Mat, Sound Insulation, Attenuation, High Noise Reduction, Heat Insulation, Non-Flammable, Flame Retardant
●Automotive self adhesive insulation, all insulation pads are heat resistant, easy to cut and install
●The sound-silencing material is convenient in size and easy to cut and install
●Sound dampening insulation, Wide application: exterior bulkhead, firewall, hood, engine compartment, engine bay, boots, wheel arch, body panels, road floor, floor interior bulkhead. It can also be used for underfloor applications due to its excellent load-bearing capacity
●Each mat size:600*400mm(L*W),Thickness:2mm/2mm Rollers sold separately
[25 square feet]
[5 square feet]
[10.5 square feet]
Description
Installation:
Firstly determines the insulating area: car roof, car floor, car door, or hood.
Once the interior is disassembled, remove the rest of the factory insulation material.Clean and degrease the surface properly before installing the mat. Measure the pre-washed surface of the spot you may be expected.
Place the material on the desired surface of your car without removing the adhesive paper.When you are ready to use the sheet, place it on the surface and stick it together.Flatten the seat by hand to avoid air bubbles.Use the roller to roll the foil as a proper step.
Installation Notes:
Clean the surface you want to apply.
Heated with a hair dryer to soften it, then compress by hand.If the room temperature is less than 5℃, first heat it with a lamp until it becomes soft.
Specifications:
Color: Silver Tone
Material: Butyl rubber, aluminum
Total Coverage Area: 25 sqft
Thickness: 2mm
Size: 23.6 x 15.7 inches (600 x 400 mm)
Package:
10 x Insulation Mat
1 x Manual
|
|
|
|
|---|---|---|
|
|
|
|
