Feature

●Visible Light Transmittance: 75%, Infrared Reduction: 91%, UV Reduction: 97%
●Blocks 99% of ultraviolet rays (UV) to prevent stains, wrinkles, and sunburns. It will also protect your interior and accessories from fading and deterioration in your vehicle. Reduces interior temperature and allows air conditioning to be used efficiently for better fuel economy.
●It greatly reduces the infrared (IR) caused by heat and prevents the skin from becoming hot and crushy. In addition, it reduces the temperature of the car interior and improves the effectiveness of the air conditioner.
●Also prevents glass from shattering. In the event of a broken glass it will reduce the shatter on the inside and outside of the glass.


Description

Benefits of applying window film

1. Using UV protection film to protect womens skin and prevent interior color fading.
2. By applying the car film, it prevents the glass from shattering when broken and helps to improve safety.
3, Helps Increase Privacy and Security
4. Heat and cold insulation, energy saving.

Note
The thickness and color of the film after installation may differ depending on the brightness of the interior or exterior of the vehicle, and the appearance of the film depending on your monitor.


Application Instructions

Forming a film
1. Cut the film to the size of the window(slightly larger)
2. Clean the surface of the glass to remove oil and dust.
3. Wet the paper towel with application solution and apply to the glass surface (outside rather than the inside of the final stick).
4. Paste the cut film on the glass surface (outside) with the paper backing The backing paper will not peel off.
5. Align the position of the film and cut the corners of the film round with scissors.
6. Heat the inflation part that is not in contact with the glass with a heat gun (blow dryer) and shrink and seal it. (Shrinks at a time by step)
7. Once the film is adhered to a certain extent, spray the application liquid on the surface and back. (Spread the film half at a time to prevent it from slipping.
8. Using rubber spatula, etc., to remove wrinkles from the center of the glass and apply hot air to places where shrinkage is not sufficiently sufficiently (fluffed) to ensure a perfect fit.
9. Use a permanent pen to write the exact shape of the glass (positioning)
10. Cut with a cutter as you write with a pen.

Now the film is formed.
It can be applied to the surface (inside the car).

11. Clean the surface of the installation first.
12. Peel off the backing paper and spread the application fluid.
13. Apply to the glass on the surface.
14. Peel off the backing paper and stick the film to the glass surface.
15. Apply application solution to the surface of the film to make the rubber spatula more slippery.
16. How to apply the gap between the film and the glass surface? Creases and stays put