[50cm wide x 30m long roll box sale]
#PR65 (FUNNY) This is a film that has a black tint film that is applied to the fanny ghost.
Transparent colors are pink-red smoke and reflective colors change depending on the angle and part of the eyes, such as purple to blue to green.
Cuts (interference) near 530 nm of visible light.
Made from optical grade (optical grade) dimming film (dichroic film) with the same technology as sports sunglasses and polarized sunglasses.
It is easy to turbidity when the pigment is black overlayed, but by layering the dye-primed type for better color development.
Cannot be used for installation around the front with a visible light transmittance of about 31%.
Brain Tac Multilayer Film FUNNY GHOST DeepSea Funny Ghost Daepsy Prism Smoke 28
Product code: PR28 (DeepSea).
The thickness has been increased to about 15 μm to make the garbage stand out.
No metal is used, so it does not affect the radio wave.
Color:
Prism Color + Smoke
[Optical Specifications] JIS A5759 3mm glass construction
Visible light transmittance 28%.
Visible light reflectivity: 40%
Solar Absorption Rate: 26%.
Sunlight reflectivity: 15%
Sunlight Transmittance: 59%
Shielding coefficient: 0.78
Sunlight Heat Retention Rate: 0.69
(Sun Heat Rejection Rate) 0.31
UV shielding rate 99%.
(UPF rating) 50+
The solar heat removal rate is a deduction of solar heat from 1.
Infrared cutting rate is a peak of wavelengths of 780 - 2500 nm.
The UPF rating measures the spectrum of wavelengths of 290-400nm and is evaluated based on JIS L1925.
[Measured value] Mounted on 0.1 inch (3 mm) float glass *Actual measurements are not guaranteed.
◆Light spectrum measurement method: A light Y value (measurement without error), Safety standards for road transport vehicles (window glass technology standard) 5.9.3.1.1.
Visible light transmittance: 31%
All listed values in the product description may change without prior notice due to changes in specifications or lot changes.
Manufacturer:
Braintec Windowfilm Specialty
Brain Tech Window Film
Specifications:
For glass.
For professional use.
Automobiles (car film).
For construction (buildings in residentials, offices, stores, etc.)
Multi-layer 100% – layer + 2 ply dough tint film
Structural Color, Structural Color, Thin Film Interference, Structural Color, Structural Color
UV protection (UV protection film).
100% UV Protection
Shatterproof (shatterproof film).
Film thickness: 50μm
Separator Thickness: 0.9 inch (25 μm)
Pressure sensitive adhesive (PS)
Scratch resistant hard coat (scratch resistant).
Can be used on a single layer of heat molding.