Feature●[Specific Use] 1. Use the hole puncher to drill a hole in the paper tape to write music, then insert the end of the arrow tape into the music box. 2. Turn the crank clockwise to hear music after a few seconds. 3. When the music is finished, rotate the crank until the paper tape comes out●Write music on paper tape: The tape range is 50 beats or 100 half beats. Horizontal tap is sharp and vertical tap is half beats 2 solid lines are beat. The movement is rotated with a 15-pin shaft to read the musical notes and move the acoustic board to make sound. If the pitch sound appears multiple times within the shaft rotating circle, the two sounds such as 11 are very close, and the paper tape can drill two holes in adjacent solid lines and dotted lines. The sound after you read the first sound will be ignored. The adjacent 1/4 beats of the same pitch is also ignored. For this reason, a hilarious melody such as 15351535 or a code may be too repeatedly to output music as 153153. Try reconfiguring the code and melodies. If there is no further reconfigure, you will need to consider whether to write on the tape. 1/4 beat, just drill a hole between the solid and dotted lines. In a word, the smallest volume that can be identified by movement is half the distance between the solid and dotted lines. With a narrow 15 sound range you can start with your favorite songs on the tape.If you need a proper reconfigure, it doesnt matter what you need●DIY Songs: Put paper tape into the music box movement and stir the shaft to make a sound. Write a note on the paper tape and use the puncher to drill a hole. Drill a hole in the attached paper tape to create your own music melody and play your favorite songs●【CREATE MUSIC BOX】This music box movement and tape set is perfect for making your own music box. You can use blank tape for composing, and you can also make new tapes on cardboard●(Quality Guarantee) We inspect every product before shipping, so you can buy with confidence. If there is a defective item due to manufacturing reasons, please contact usDescription
Specifications: 15. Material: Zinc alloy mental paper.
Music movement size: 10 x 4.5 x 2cm / 3.9 x 1.8 x 0.8in
Tape Size: 18.9 x 1.6 inches (48 x 4.1 cm)
Instructions
Use the 1-hole puncher to drill a hole in the paper tape to write music, then insert the end of the tape with arrow into the music box movement.
2. Turn the crank clockwise to hear music after a few seconds
3. When music is finished, the crank continues until paper tape is released.
Write music on paper tape
Tape range is 50 beats or 100 half beats. Horizontal tap is sharp and vertical tap is half beats 2 solid lines are beats
The movement reads the musical notes in a 15-pin shaft rotation and makes a sound by moving the acoustic board. If the pitch sound appears multiple times within the shaft rotation circle, such as 11 are very close, the paper tape creates two holes of the C sound in adjacent solid lines and dotted lines, the sound after first sound is ignored. 53515 A hilarious melody or code such as 35 may cause 5 to be too repeatedly to output music as 153153. Try reconfiguring the code and melody. If no further reconfiguring is required to consider whether to write on the tape 1/4 beats are possible and you just need to drill a hole between the solid and dotted lines.
In a word, the smallest volume that can be identified by movement is half the spacing between the real and dotted lines. The 15 sound movement is narrow, so you can start thinking if you want to write your favorite songs on the tape.
Note
1. Secured with 2 or 3 screws commonly used for toys and gifts with screw holes.
2. Use the appropriate adhesive to fix it.
3. The volume is low, you need to fix it in the appropriate box or case to increase the volume.
Package Included
1 x Music Box Movement
1 x Hole Puncher
20 x Blank Tape