Note:
* Japanese instruction manual and installation method are included for easy installation by yourself. Please connect each component correctly, according to the wire signage to prevent failure. When the lens recess points upward, compatible with symbols, please connect with the camera connector on the side of the body.
*When the lens recessed hole is facing upward, the recorded video is in the positive direction.
* The camera is waterproof, but the MT1 body is not waterproof (comes with waterproof rubber cover)
* GPS module is ideal for signal reception when installed outside of the bike When installing, please keep away from metal components to avoid affecting the GPS signal. * We provide free replacement after-sales service for the case of initial defects within 30 days of delivery. We will also deal with free repairs to unhuman incidental failures only within one year of purchase.
* In the event that the product or accessories may be defective or fault, please consult us before moving to return or refund.
Product Specifications:
Model Number: MT1
Product Size: 3.3 x 2.2 x 0.8 inches (85 x 55
DSP: NTK 9663
Sensor: Front & Rear Camera IMX323
LCD: 2.7 inch LCD monitor
Lens: Waterproof 6G glass
Camera: Waterproof
Wired Remote Control: Waterproof
GPS module: waterproof
Body: Non-waterproof (comes with waterproof rubber cover).
Resolution: Front 1080P Rear 1080P
Video Compression Format: H.264 MOV
Video output format: NTSC/PAL
Light source frequency: 50Hz / 60Hz
Speed unit: KM / H MPH
Power: Capacitor Version
WIFI: Support
GPS: Support with GPS module
RF Control: Support (Wired Remote Control)
Loop recording: 1 minute, 3 minute, 5 minute.
Emergency Recording: G-sensor
Voice Record:Support
Display mode: Front camera, rear camera, front and back simultaneously display
Motion Detection: On/Off
Collision Sensitivity: Off/Low/Medium/High
System languages: English, Japanese, and more 10 languages.
Package Includes:
1 x MT1 main unit.
2 x Camera (with extension cable)
2 x Metal Brackets
2 x Plastic Brackets
1 x Power Cable
1 x USB cable.
2 x 3M adhesive tape (for camera base)
2 x Round 3M Adhesive Tape
2 x Magnet
8 x Screws
2 x Hex Screws
1 x Allen wrench.
1 x Sticker
4 x Velcro
1 x GPS module
1 x Rubber cover (for waterproof and dustproof)
1 x Wired Remote Control
1 x User Manual