Feature(may vary by option.)
●Drill bits are attachments that are used for various nail applications such as attaching to the tip of the nail machine, gel nail off, scalp off, repair and forming. In addition to nail offs, the acrylic 3D, parts and visuors are turned off and adjust the C-curve and length of the double-edged drum bits quickly and steadily across a wide area. Bit Type (Coarseness): XC Approx. 3.5 oz (100 g); C Approx. 5.3 oz (150 g); M Approx. 6.3 oz (180 g); F is approximately 8.5 oz (240 g). You can use it according to the purpose, but if you are a beginner who is afraid of oversharpening, we recommend "F" for you. Recommended for professional use in salon work is "C". ● Easy Nail Off by Yourself: For self-nails, you can replace the nail machine with a nail machine, so it is more efficient when you use both blades when you turn off the nail machine with forward and reverse rotation. For speedy cutting and saving time. ] It is quite difficult to sharpen 10 nails by hand. With a drill bit, even if you are doing a hand-nail, it is electric, so it is less likely to get tired of your hands and can significantly reduce the time of cutting
●(Product Specifications) Package Contents: Ceramic Cylinder Drill Bit Double-edged Set of 4, Polishing Type; "XC" Extra Course (Ultra Coarse) Approximately 3.9 oz (100 g); "C" Course (Coarse) Approximately 5.3 oz (150 g); "M" Medium (Medium) Approximately 6.5 oz (180 g); "F" Fine (240 g) Product size: Head shaft 0.26 inches (6.6 mm); Head length: 0.5 inches (13 mm); Shaft diameter: 0.09 inches (2.35 mm); Material: Ceramic, plastic, 304 stainless steel; Weight: 0.2 oz (6 g) (per piece); The head is made of high hardness and strength ceramic, giving it a powerful and comfortable experience. There is no rotation shake and you can work safely and safely without the need for control of the blade. The shaft diameter is highly versatile, 0.09 inch (2.35 mm), and the sharp edge is sharp, and the cross cut does not dig into than necessary. Abrasion resistant, resistant to heat, rust and deterioration, so you dont have to worry about the plating coming off. Instructions not included. Please acknowledge After use, remove clogged bits and clean them directly with clean water and disinfect them with alcohol and store them
●[How to use] First, use a coarse drill bit. Apply evenly to surface art or gel scallop base thickness. Shaving as thin as possible will help you perform the next process. Be careful not to scrape your nails. Use acetone, cotton, aluminum foil, etc. to dissolve the remaining parts. (Gel Scalp changes the time until melting is melted) Remove melted and torn areas with wood sticks or pushers. If it does not melt, use a medium drill bit again to sharpen it. Depending on the thickness, it can be removed by scraping and melting 2 to 3 times. The last minute gel scallop is removed with a fine drill bit, making sure not to hit your nail. After off, finish with nail files, buffs, shiners, oils, etc. Depending on the manufacturer, the grinding process may vary slightly even with the same coarseness of the eye. Using the chip to practice bits will allow you to understand the point of operation for bits
●Precautions for Use: *When using a nail machine, please match the rotation speed according to the technology. 10,000 rpm is recommended for beginners. The higher the rotational speed results in a professional nail finish, while the increased number of rotations increases friction, so careful attention is needed to avoid scratching your nails and skin. Some skill may be required to use the drill bit. It is recommended to be experienced when using. If you press the drill bit part firmly against your nail, it may damage your nail. When you hit the device on the same part of your nail, it will break the delicate cuticle of your nail, become two nails or make your nails brittle. There is a danger of friction and heat can be easily held, so please treat it carefully to avoid damaging your nails and skin. If you remove the nails and exfoliation, it produces fine dust and floats into the air. Please use a dust collector or goggles or mask to avoid getting into your eyes or sucking as it may cause health damage. Also, keep out of reach of children
●● There are many shops that pay for nail offs at nail salons, so you can reduce expenses. For those who want to repair their nails by themselves or frequently care for their nails, it will be very smooth and short when turned off. It is worth it! (30 day manufacturer warranty) ] This product is backed by a 30 days money back guarantee from the date of purchase only from the "Daisybee" authorized dealer. Also, if you have any questions or problems about the product, please feel free to contact us through our customer support. (Checked by Japanese staff! Our products have undergone strict inspection from production to shipment. So you can buy with confidence. In addition, all of our products are commissioned to Amazon for inventory management and shipping services. If the product is damaged or dirty due to the delivery or other reasons, please contact us through customer support
[Green C Course (Coarse): Approximately 5.3 oz (150 g)]
[Red F fine (fine) about 240 G]
[Set of 4]
[Black XC Extra Course (Ultra Coarse) Approx. 3.5 oz (100 g)]
[Blue M Medium (Medium) Approx. 6.2 oz (180 g)]
Description
Indications
Please follow the precautions for use in the product description and use it correctly