Feature

●>>High Performance Maximum Power Point Tracking (MPPT)
●>>Intelligent Surveillance Management
●>> Inputs and outputs are completely separated to protect electrical safety
●>>Multiple Parallel Stacking
●>>Digital Control System

[22 50VDC Regular version]



[22 50VDC EU version]



[22 50VDC US Version]




Description

Inverter Features
>>Simplify Maintenance (User Service)
>>Low business and maintenance costs
>>Flexible Installation
>>Reverse Power Transmission

Please be careful. This product does not contain WiFi modem, so there is no antenna on the inverter itself.

Parameters

Input Data WVC-700
Recommended Input Power
700watt(2x350W)

Output voltage mode automatically switches to 120/230V according to the local grid
Maximum Input DC Voltage: 36 - 50 V
Peak Power Tracking Voltage 22-50V
Operating voltage range of 22-50V
Min/Max Start Voltage: 22-50V
Maximum DC Short Current: 53A
Maximum input current: 36A
Output Data @ 120VAC @ 230VAC
Peak power output 700WATT 700WATT.
Rated Output Power: 700 WATT 700 WATT.
Rated Output Current: 6.7 A, 3.5 A.
Rated Voltage Range: 80-160VAC 180-260-260VAC
Rated frequency range: 48-51Hz/58-61Hz/48-51Hz/58-61Hz
Power Factor: 99% > 99%
Branch Circuit 5 pcs (single phase) 10 pcs (single phase)
Output Efficiency @ 120VAC @ 230VAC
Static MPPT Efficiency 99.50% 99.50%
Maximum output efficiency 99% 99%
Average Efficiency: 99% 99%
Night power consumption<; 1W max<; 1W max.
THD<;5%<;5%
Appearance
Ambient Temperature -40DEGC ~ + 60DGC
Operating temperature range (inside inverter) - 40DEGC ~ + 82DEGC
Dimensions (WxHxD): 11.2 x 7.9 x 1.6 inches (283 x 200 x 41.6 mm)
Weight: 5.5 lbs (2.5 kg).
Waterproof Rating: IP65
Cooling self-cooling
Features
Communication mode is not supported
Power transmission mode reverse transmission, load priority
Monitor system lifetime
Grid Detection DIN VDE 1026 UL1741
Electromagnetic Compatible EN61000-3-2 Safety EN6209.
Certificates Application

Micro inverter installation
With the STEP1 fixed PV holder inverter installed, it is:
Connect two DC terminals of STEP2 PV to the inverter. Positive connection Shows as below.
Open the waterproof cap on the AC output side of the STEP3 micro inverter and plug it into the AC power line. Show below
Step 4 Connect the AC output line to the main AC cable
Repeat the first steps to complete the installation of the STEP5 micro inverter.
Step 6 Finally, connect the AC main cable to the utility grid to maintain renewable energy and save $$$$.

□