The long inset hanging hardware allows you to easily attach and remove the panels without any tools.
When installed, the gap between the panel and the wall is only 0.2 inches (5 mm) or less.
The panel side and wall side are made of the same material, so it is easy to handle with the management process.
Easy to install continuous panels.
It has an effect to prevent warping of large panels, etc.
The groove of the screw guide can be set to the mounting hole.
Product Specifications:
Product Number: AUH-900
Length: 35.4 inches (900 mm)
Material: Aluminum alloy
Finish: Silver anodized finish
Load Capacity: 294.2 N
Load Capacity: 66.2 lbs (30 kg).
[Use]
Display panels, paintings, furniture, etc.
Recommended Screws: *Screws are not included.
Plate tapping screws 4.
[Note]
Please make sure to install the panel and wall of a hard substrate such as a pillar on the back.
The load capacity is based on the product (length of 27.6 inches (700 mm) and the top and bottom (30.7 inches (780 mm) intervals), with panels of height 35.4 inches (900 mm), width 27.6 inches (700 mm), thickness 1.0 inches (25 mm) (load is at the center of thickness). Please note that the distance between the wall and the load and the panel material will vary.