Feature

●The module with low voltage protection, low voltage protection to the state of below 2.5V can be better and protect the battery to avoid excessive discharge
●The module uses Taiwan production boost chip, high efficiency (up to 92%), plus built-in overcurrent protection chip, protect the module and use the device after class
●This module uses a standard USB interface, allowing you to use all universal USB to charge mobile phones, MP3, MP4 and other devices, IPs and other mobile phones
●As a main filter capacitor, the laminated ceramic capacitor used by this module can be lowered by the output ripple of 20 mV (with 5 V 1A output)
●The module can adjust the fixed resistance to the output voltage up to 12V, but can be adjusted to ensure output power less than 5W


Description

Features:
The module uses Taiwan production boost chip, high efficiency (up to 92%), plus built-in overcurrent protection chip, protect the module and use the device after class.
The module with low voltage protection, low voltage protection to the state of below 2.5V can be better and protect the battery to avoid excessive discharge.
The module can adjust the fixed resistance to the output voltage up to 12V, but can be modified to ensure output power less than 5W.
As a main filter capacitor, the laminated ceramic capacitor used by this module can be lowered by the output ripple of 20 mV (with 5 V 1A output).
This module uses a standard USB interface, allowing you to use all universal USB to charge mobile phones, MP3, MP4 and other devices, IPs and other mobile phones.
Specifications:
Module Characteristics: Non-insulated Boost Module (BOOST)
Input Voltage: 2.5-6V
Output Voltage: 4-12V (Adjustable to replace resistance to adjustment(required), default 5V)
Output Current: 00 mAh (max)
Efficiency: 92% (max) (high input voltage, high efficiency)
Switching frequency: 1MHz
Output Ripple: 20 mV (MAX)
Operating Temperature: Industrial use (-40℃~+85℃)
Voltage regulation: ±2.5%
Short Circuit Protection: No (Use Lithium battery with protective protection)
Input: IN + Positive, IN - Negative
Output: USB output
Size: 1.2 x 0.5 x 0.3 inches (3 x 1.3 x 0
Application:
This module can be used for DIY mobile phone power output which allows you to charge two normal lithium batteries for a single or mobile phone or PSP device.
DIY mobile power supply, requires only one battery, you can charge your phone with 5V output voltage, MP3, MP4, PSP charger.
If you have the only lithium battery, when your device needs a 5V power supply, this module can be directly step up to 5V to solve your problem.
Note:
This module is a fixed 5V output module
(Negative Input) IN + (Positive Input), OUT-(Negative Output) and OUT + (Positive Output) must be connected correctly, otherwise it may cause damage to the module - Module shown on IN
This module has charge LED light when the LED light can be used as an indicator
Package includes:
3 x USB Boost Modules