Features:
1. CCM5D DC motor speed regulator controls the speed of DC motor by adjusting Pulse Width Modulation (PWM).
2. Large 0.56 inch 3-digit LED display numbers allow for observation in the most adverse conditions.
3. The display range of the 3 digit LED display is 00 to 100. (For example, the picture 1 shows 066 which means the duty cycle of PWM output is 66%. )
4. Variable speed range is 0%-100%. Suitable for the DC motor (or DC load) within the peak current of 8A
5. Incorporate the push key. Push closed, then push open.
Specifications:
Type: PWM DC Motor Controller
Color: Black.
Size: Approx. 3.11 x 1.65 x 0.98 inches (79 x 42 x 25 mm).
Net Weight: about 58g
Input power supply voltage: 6V-30VDC
Maximum output power: 240W
Maximum Continuous Output Current: 5A (8A waveheight value),
LED indicates duty ratio from 0-100%
PWM frequency: 16kHz
Adjustable Duty Cycle: 0%-100%
Operation Instructions:
Please make sure the power is off before you wire the controller.
1. The connection wire """ refer to the wiring diagram".
2. Turn on the power and adjust the potentiometer.
3. Duty cycle with LED display display PWM output.
4. Press the key, the controller will open and press it again to close it.
WARNING:
1. Do not reverse the positive and negative power loads.
2. This will damage the controller to change motor decription.
3.Replacement motor positive and negative wires
Package includes:
1 x CCM5D DC Motor Speed Controller