Feature

●Size: 5.9 x 7.2 x 3.0 inches (150 x 182 x 76 mm); Weight: 2.2 lbs (1 kg); Ozone Output: Less than 0.004 ppm (Distance: 5.9 inches (150 mm); Ion Balance (Distance: 1.4 - 3.5 m3/min); Wind speed: 1.5 - 2.9 ft (1 - 2.9 m (1 m (1 m) (1 - 2.9 m (1 m) (30 m (1 m) (3 m) (straight Louver distance (30 mm) ) 0.1 - 0.3 m/sec (Wide angle louver distance 11.8 inches (300 mm) center); Input Power: DC 24 V (AC adapter included AC100 - 240 V); Capacity: 12 VA; Output Voltage: ±7,500 V0-P ; Accessories: AC adapter, wide-angle louver, lead wire for output signals (2 pieces).
●Power Rejection Time: Less than 1.5 seconds (distance 11.8 inches (300 mm) when factory); Usage Environment: Ambient Temperature: 32.2 - 104°F (0 - 40°C), Ambient Humidity: 15 - 85% RH (no condensation); Filter: Pre-filter; Output Signal: MOS FET Relay Non-voltage contact output (NC output) (high voltage abnormalities or fan abnormalities off); Noise: 63 dB (1 A (1 dB) m); Material: Main unit. ABS resin, discharge needle: tungsten, stand: SECC, louver: PC, ASA.


Description

Adopts HDC-AC system so the discharge needle is resistant to dirt and provides a stable power discharge performance for a long time.
The two types of louvers allow you to select the power reduction area.
●★ Low wear and dirt of discharge needles for a long time, stable power discharge performance.
The louver and discharge needle unit can be removed and removed without any tools and is easy to maintain.
●★The discharge needle is extremely low wear even after long periods of use, and there is no need to replace the discharge needle due to wear
LED and abnormal signals will notify you of power abnormalities or fan abnormalities.
The angle of the main unit uses a locking mechanism to adjust the angle, and the angle of the unit is difficult to change due to vibration.