*Function: measure the phase between three phase AC voltage, leakage current, current, effective power, invalid power, phase power, power, power, phase voltage, frequency, power energy, phase sequence
*Power supply: 6V DC (LR6 x 4 alkaline batteries, 12 hours of continuous use) (battery not included).
* Test mode: Clamp CT, Integration mode
*Clamp Size: 3.1 x 3.1 inches (80 x 80 mm) (can clamp 80 mm diameter electrical cable, or 96 mm x 4 mm flat cable and steel ground wire)
* Current Range: AC 0.0A-2000A, Resolution: 0.1A
* Power Range: AC 0.0KW-1200KW, Resolution: 0.1KW
* Voltage Range: AC 0-600V, Resolution: 0.01V
* Frequency Range: 25Hz - 100Hz, Resolution: 0.1Hz
* Phase Range: 0.0-360.0°C, Resolution: 0.1°C
* Power Factor Range 0.3-1.0 (Capacitive or Inductive), Resolution: 0.001
* Power Energy Range: 0.000KWh to 72000KWh Resolution: 0.0001KWh
* Measured wire with a near-geometric center of the wire position clamp
*Data Storage: 200 sets, "FULL" symbols indicate full of memory. RS232 interface RS232 interface download data to your computer for analysis and management. Communication Wire: RS232 Communication Wire, 5.9 ft (1.8 m)
* Frequency: 50Hz, 60Hz automatic identification
* Gear shift automatic transmission
* Sample rate about 2 times/sec
* Line voltage below AC 600V
*Display Mode LCD: 128 dots * 64 dots; Display Area: 43mm * 29mm
*Metric size 275 * 145 * 40mm
* Backlight controlled by "*" key
*Displays the symbol of data hold "HOLD"
*Overflow "OL" symbol will be displayed
*Automatic shutdown automatically shuts down after about 15 minutes of power on to reduce battery consumption.
*Voltage Detection When the battery voltage is below 5.2V, the battery symbol "" will be displayed.
*Weight: 2.2 lbs (1