Function: Can be used for high school science experiments, electronics, negative ionizers, and most science high voltage sources. After input of DC 6-12V voltage, you can get a DC high voltage of about 10,000V (about 1-2cm) (arc) at the output end.
Produces arcs with high temperature and high frequencies, making it easy to ignite flammable objects. Due to the principle of Tesla coils, the module output high voltage pulse current, small capacity and high efficiency. The peripheral circuits are simple (connect the switch, install the battery) and have high discharge strength.
Specifications:
Model (Optional): 901-2 (continuous work for 10 seconds), 901-c2 (1 minute continuous work).
(Note: Exceeding working time is strictly prohibited)
Input Voltage: DC6-12V
Input current: 1A - 3A (related to voltage)
High pressure type: Integrated pulse high and low pressure
Output Voltage: Approx. 0.5 - 1 million V (please be careful when using)
Discharge distance between high pressure poles: 10-20mm
Output high pressure wire length: Approx. 3.9 inches (100 mm)
Input power line length: approx. 3.9 inches (100 mm) (red line is positive)
Size: 3.4 x 1 inches (86 x 25 mm).
Weight: Approx. 2.2 oz - 2.5 oz (63 - 72 g).
Notice:
1. Avoid high voltage and no load power supply. (Adjust the appropriate distance of the high pressure cable end before power is connected.