Welcome to our store.
We provide the best quality products and service, your satisfaction is our eternal pursuit.
Product Overview
Compatible boards typically use microchip microcontrollers. Adding several functions such as DAC output, PWM specific functions, and calculation accelerator (DSC), such as most LGT8F328P microcontrollers designed by LogicGreen and ATMega328P microcontrollers. The MCU clock speed is double (32 MHz).
The Keys LGT8F328P control board is a design and development board designed LGT8F328P chip as its core. It is not compatible with OCROBOT 0.1.2 IDE and is not only compatible with IDE. You need to install the driver USB to serial port chip HT42B534-1 control board before use.
We also offer a micro USB cable so you can power up the control board and upload the code via the micro USB interface.
Conveniently to connect some other sensor modules to this control board, several major signal pins are expanded to the 3PIN interface (GND, VCC, signal) on the control board. Please note that the voltage VCC terminal is 5V.
Specifications
(1) Main control chip: LGT8F328P
Serial Port Chip (2) USB: HT42B534-1
(3) Input Voltage: DC 5V (Powered Micro USB)
(4) Output current (total): 80mA
(5) Normal port current drive: 12mA
(6) Digital Port(27): RX0(D0) TX1(D1) D2-D13; A0(D14) A0(D14) A1(D15) A2(D16) A3(D17) A4(D18) A5(D19) E1(D20) E3(D21) SWC(D22) SWD(D23) E4(D24) E5(D25) AREF (D26)
(7) Analog Port(12): A0-A5 E1(A6) E3(A7) SWD (A8) E4(A9) E5(A10) AREF (A11) (12-bit 4096)
(8) Operating frequency: 16MHz
(9) Two LED lights included: D13 indicator and power indicator
(10) Comes with one reset button
(11) comes with 1 micro USB port: you can use it to power up your code.